Kelly Roofing Step by Step Flat Roof Roofing Process
1. Clean existing roof system as needed including flashings, boots, vents, and rotted wood areas. |
||
2. Remove and replace any and all rotted roof sheathing throughout entire roof area. |
||
3. Remove and replace any and all rotted fascia. |
||
4. Disconnect existing a/c units using licensed a/c contractor. |
||
5. Manufacturer and install new aluminum a/c stands to meet code requirements and fasten to deck. |
||
6. Reconnect existing a/c units using licensed a/c contractor. |
||
7. Install new a/c quick disconnects, where needed. |
||
8. Install eps fan fold insulation to the entire roof’s surface, fastened. |
||
9. Install tie-in roofing materials as needed to match existing roof, where applicable. |
||
10. Specially design a high wind resistant duro-last pvc/cpa single-ply roof system including membrane, flashings, vents, boots, curbs, and fasteners entire roof area. |
||
11. Install duro-last membrane entire roof area using poly-plates and duro-last screws, fastened to cad specifications, color white. |
||
12. Install duro-last parapet membrane entire perimeter of roof, fastened to cad specifications, where applicable. |
||
13. Install new perimeter flashings including fascia bar - fascia cap - drip edge, fastened 6" on center. Seal top flange of fascia bar/cap using duro-caulk duro-caulk sealant, where applicable. |
||
14. Install new duro-last boots over plumbing stacks, weld-band-seal, where applicable. |
||
15. Install new duro-last curb at existing vent stacks, weld-band-seal, where applicable. |
||
16. Install duro-last safety walk-pad network from roof access point to a/c units for roof traffic personnel, where applicable for rooftop access. |
||
17. Install duro-last wind-baffle vacuum moisture control vents for increased roof system wind uplift. |
||
18. Install duro-last rooftop sign describing care, warnings, and notices for roof traffic personnel. |
||
19. Clean up and remove all debris. Use magnet to remove fasteners from lawn. |
||
20. Fifteen (15) year guarantee on all materials, labor, and installation from duro-last. (commercial applications only) |
